MCZ Face User Manual
Page 21
PELLET STOVES
Chapter 3
INSTALLATION AND USE MANUAL
page
21
Installation and assembly
Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
3.3. CLADDING ASSEMBLY
3.3.1. KAIKA STOVE
Position the steel top “A” and secure it using the four screws supplied
“D” and “E” (two on the right and two on the left) from bottom
upwards.
Remove the back profile “C” already secured to the stove with three
screws “F”, “G” and “H”.
Take side “B” and insert it, corresponding to the holes, into plugs “M”
and “N” prearranged on the front part of the stove.
Secure side “B” using the uppers screws “L”.
At this point remount profile “C” securing it with three screws “F”, “G”
and “H” to the structure and to side “B” in steel.
A
B
C
D
E
F
G
L
H
Figure 4 – Assembling the sides Kaika stove