MCZ Face - Manual (Page 24)

PELLET STOVES Chapter 3
INSTALLATION AND USE MANUAL page
24
Installation and assembly Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
D
G
F
E
3.4. MAKING THE ELECTRICAL CONNECTIONS
Connect the supply cable first at the rear of the stove and then to an
electrical outlet on the wall.
The main switch located on the rear of the stove should be switched on
only when you want to light the stove.
If you do not intend to use the stove, it is advisable
to keep it switched off.
Electrical connection of the stove
Figure 7 – Details of the Face stove -
assembling the sides