MCZ Face - Manual (Page 39)

PELLET STOVES Chapter 5
INSTALLATION AND USE MANUAL page
39
Menu structure Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
Esc Set
< Settings >
Mode:Auto Menu
Temp:22°C Fan:A
Esc Set
< Time and date >
21.0°C 21.04
OFF
Esc Off Set
< Auto Eco > Esc It Set
< Language >
Esc Off Ok
< Auto Eco > Esc On Ok
< Auto Eco >
Esc On Ok
< Auto Eco >
5.4.2.1. Mode AUTO-ECO
When ECO-STOP is activated and the chosen temperature selected, if
the latter is lower than the current room temperature, the apparatus
will immediately start counting the “ECO shutdown T”.
In the event of chosen temperature higher than room temperature the
apparatus shall continue to work at full power until the requested
temperature is reached.
5.4.3. Tones (Panel display: ON-OFF)
This setting deactivates sound when pressing the keys. It does not
effect alarm signalling.
5.4.4. Pellet recipe - modifying the load
This function is for adapting the stove to the pellets in use. In fact, as
they are several types of pellet on the market, stove operation is
strongly variable according to higher or lower fuel quality. In the event
that pellets tend to get blocked in the grate due to excessive load of
fuel or in the case in which the flame is always high even at low powers
and vice versa if the flame is low, it is possible to decrease/increase
the pellet feed rate into the grate: