MCZ Antares '03 - Manual (Page 31)

Use of the stove
3.10 HOW TO DISPLAY AND PROGRAM THE SELECTED RECIPE
Press keys 3 and 4 simultaneously.
The display shows the recipe currently selected.
Alternatively, if the display shows the symbol ' — ‘, it indicates that no recipe is currently selected.
To exit from the menu without making changes, press key 3 or key 4 or wait 120 seconds without
pressing a key.
The procedure for selecting the recipe is active only
when the stove is not lit.
To set or modify a recipe, the procedure is as follows:
Press keys 3 and 4 simultaneously.
Press key 1 or key 2 to search for the parameter relating to the required recipe according to the
following table:
To make the change active, hold key 5 down for several seconds.
Example of message displayed on the remote control:
G1 / SET / RECIPE 2
indicates that we have a stove model VEGA, ASTRA or AURORA and have
chosen a setting for a 'lightweight' pellet with smoke outlet predominantly vertical.
H4 / SET / RECIPE 7
indicates that we have an ANTARES stove and have chosen a setting for a
'heavy' pellet with smoke outlet predominantly horizontal.
All VEGA-ASTRA-AURORA stoves are default set to recipe G1
The ANTARES stove is set to recipe G9.
30
N.B.
On some models, the
message “Recipe” may
appear as “Ric”
Parameter Display Model of stove
G0 RECIPE VEGA-ASTRA-AURORA
G1 RECIPE VEGA-ASTRA-AURORA
G2 RECIPE VEGA-ASTRA-AURORA
G3 RECIPE VEGA-ASTRA-AURORA
G4 RECIPE VEGA-ASTRA-AURORA
G5 RECIPE VEGA-ASTRA-AURORA
G6 RECIPE VEGA-ASTRA-AURORA
G7 RECIPE VEGA-ASTRA-AURORA
G8 RECIPE ANTARES
G9 RECIPE ANTARES
H0 RECIPE ANTARES
H1 RECIPE ANTARES
H2 RECIPE ANTARES
H3 RECIPE ANTARES
H4 RECIPE ANTARES
H5 RECIPE ANTARES