MCZ Antares '03 - Manual (Page 21)

2.9 Fitting the ceramic cladding on
Astra-Aurora-Antares
ORIENTATION OF THE CERAMICS
After positioning the stove in the chosen location, level up the stove body by means of the
adjustable feet fitted to the base. Carry on with fitting the ceramic cladding only after making the
connection to the flue pipe or the vertical smoke duct as described above.
The ANTARES stove has panels of identical design which can be fitted on the right-hand or the left-
hand side, and either way up.
The AURORA stove, however, has panels of identical design which must go in fixed positions (fig. 8).
The ASTRA stove has panels (with different designs) with different layouts for the two sides (fig. 9).
Installation
Fig. 8 Aurora stove
Fig. 9 Astra stove
1°
2°
3°
4°
5°
5°
1°
2°
3°
4°
Recommended fitting sequence:
•
Left-hand side
• Right-hand side
• Top
HANDLE THE
CERAMIC PANELS
WITH GREAT CARE
AT ALL TIMES
20