MCZ Antares '03 - Manual (Page 2)

Contents
2.1 Working environment
2.2 Preparation
2.3 Installation and fitting
2.4 Connection to the external air intake
2.5 Connection to the flue
2.6 Connection to an external fluepipe in insulated or double-walled pipe
2.7 Connection to a chimney or flue duct
2.8 Operating problems caused by draught defects in the flue
2.9 Fitting the ceramic cladding
Chapter 3 Use of the stove
Preface
Symbols used
1.1 Guarantee conditions
1.2 Safety instructions
1.3 Operating instructions
1.4 Safety devices
1.5 Operating principle
1.6 The pellets
1.7 Models of stove VEGA-ASTRA-AURORA-ANTARES
1.8 Technical characteristics
3.1 Checks to make before lighting the stove
3.2 Loading the pellets
3.3 Instructions and advice on first lighting
3.4 Control panel
3.5 Managing the stove with the LCD remote control
3.6 Settings to carry out before first lighting
3.7 Setting the current time
3.8 Selecting the display language
3.9 Selecting the recipe according to the type of pellet used
3.10 How to display and program the selected recipe
3.11 Manual operation: lighting the stove using the control panel or the remote
3.12 Automatic operation with the digital room thermostat
3.13 Passing from manual operation to automatic
3.14 Passing from automatic operation to manual
3.15 Automatic operation with the timer-thermostat
3.16 Programming the timer-thermostat
3.17
Operation of the stove using the external thermostat
3.18 Connecting the external thermostat
3.19 Watching the flame
3.20 Alarm signals
3.21 Other messages
3.22 Lockout of the stove
3.23 Shutting the stove down
3.24 Locking the keyboard on the control panel and the LCD remote
Chapter 2 Installation
Chapter 1 Information
Introduction
1
24
24
25
26
27
28
28
28
27
30
31
32
32
32
33
34
36
36
37
38
39
39
40
40
13
14
15
15
17
18
18
19
20
4
5
6
7
8
9
10
12
Page