MCZ Antares '03 - Manual (Page 15)

Installation
2.2 Preparation
The Vega stove is delivered in a single package.
Astra, Aurora, and Antares stoves are delivered in two
packages:
The first contains the stove unit Fig.1
The second contains the ceramic cladding.Fig.2
Open the packaging, take off the bands, remove the
stove unit from the pallet and position it in the chosen
location, taking care that its position complies with the
above instructions.
The main stove unit must always be moved in an
upright position and a trolley must always be used.
Take particular care to see that the door and its glass
are protected from mechanical impact which could
damage them.
Moving the product must always be done with care.
If possible, unpack the stove in the area where it is
going to be installed.
The materials which make up the packaging are not
toxic or harmful, so no special procedures for disposal
by required.
Their storage, disposal or possible recycling are
therefore the responsibility of the final user, in
compliance with current legislation on the subject.
Do not store the stove unit or its cladding without their
packaging.
14
Fig.1
Fig.2