MCZ Antares '03 - Manual (Page 24)

VARIATION FOR ANTARES
Remove the two screws from the pellet compartment cover, take it off and position the ceramic
top (fig. 13).
Refit the cover and tighten it finally (fig. 14).
Fig. 13
Fig. 14
Installation
Connect the supply cable first at the rear of
the stove and then to an electrical outlet on
the wall. Fig.15
The main switch located on the rear of the
stove should be switched on only when you
want to light the stove. If you do not intend
to use the stove, it is advisable to keep it
switched off.
If the stove is going to be out of use for a
considerable period, it is advisable to
remove the connecting cable from the
Fig. 15
Electrical connection
HANDLE THE
CERAMIC PANELS
WITH GREAT CARE
AT ALL TIMES
23