Epson 486SX - Manual (Page 55)

2. Press You see a menu such as the following:
Drive 1: Type 34 Drive 2: None
Number of cylinders 723 Number of cylinders
Nunher of heads 13 Number of heads
Number of sectors 51 Number of sectors
Precomp. cylinder O F F F F Precomp. cylinder
Landing zone 722 Landing zone
Total capacity (MB) 234.06 Total capacity (MB)
The menu lists the settings you can change for each
drive: the number of cylinders, the number of read/write
heads, the number of sectors, the precompensation
cylinder, and the landing zone (the cylinder on which you
park the heads when moving the computer). It also
displays the total storage capacity in megabytes.
3. If you want to change the settings for drive 1 (which is
drive C on most computers), press to highlight
Drive 1:.
If you want to change the settings for drive 2,
press and then to highlight Drive 2 : .
4. Press again. You see this submenu:
None
T y p e 3 4
User defined
Running the Setup Program 2-21