Epson 486SX - Manual (Page 100)

7. Connect the power supply and drive cables to the backs of all
your drives, as described in Chapter 7.
Replacing the Front Panel
Follow these steps to replace the computer’s front panel:
1. Turn the computer so you are facing its front.
2. Align the openings in the front panel with the power button,
RESET
button, and drives that extend out from the front of
your computer case. Also align the front panel tabs with the
corresponding notches in the case. Then guide the front
panel straight onto the computer case, as shown below.
3. Press the front panel onto
the
computer to fully insert all the
tabs into the notches on the computer case. If all the front
panel tabs do not snap into position, remove the front panel
and try again.
5-10 Accessing Internal Components