Epson 486SX - Manual (Page 190)

Modifying the Device List
If an installed device is missing from the Device List, you can
add it to the list for testing. At the following prompt, select N.
DEVICE LIST is correct ? (Y/N)
You see this menu:
1 - Add device
2
- Delete device
0 - Finish modification
To add a device to the list, select 1. The program displays a list
of other devices that are not currently included in the Device
List. You see a menu similar to this:
Additional DEVICE LIST
4 - Monochrome display adapter and CRT
7
- Math coprocessor
12 - Alternate serial port
21 - Alternate parallel port
81 - Parallel port (on video adapter)
0 - Exit to DEVICE LIST
Highlight the item you wish to add and press You can
add as many devices as necessary. When the Device List is
complete, select 0 (Exit).
To remove a device from the list, select 2 (Delete device). The
screen displays the current Device List. Select the item you
wish to delete. You can delete as many devices as necessary.
When the Device List is correct, select 0. The screen displays
the modified Device List for a final check. If the list is correct,
select 0 (Finish modification).
Performing System Diagnostics C-5