Epson 486SX - Manual (Page 43)

4. After you highlight the appropriate display adapter type,
press The screen displays your new setting.
5. Highlight *** SAVE SETTING *** and press to
return to the main Setup menu.
Setting the Power-on Password
A power-on password is an optional feature that lets you
control who can access your system. If you do not want to set a
password, skip this section.
Once you set a power-on password, you must enter it at the
key prompt every time you turn on or reset your
computer. If you do not enter it correctly, you cannot access
your system.
If you want to use your computer as a network server, you can
set your password to operate in network server mode. (See
“Using Your Computer as a Network Server” in Chapter 4 for
more information.)
Follow these steps to set a power-on password and turn on
network server mode (if necessary):
1. At the main Setup menu, highlight Password. This
submenu appears:
Power-on password
Network server mode OFF
2. Press The cursor block moves to Power-on
password.
3. Press The cursor block moves to an empty box.
Running the Setup Program 2-9