Epson 486SX User Manual

Page 188

If the list correctly describes your system, highlight

and press

If a device is missing from this list, or if you want to

change the list, press

or and

Then see “Modifying

the Device List” on page C-5.

Note

If your system uses the built-in VGA adapter or an EGA or

VGA card with a color monitor, your device list should

include item 5, Color graphics adapter and CRT. If your

system uses the built-in VGA adapter or an EGA or VGA

card with a monochrome monitor, your device list should

include item 4, Monochrome display adapter and CRT.

After you confirm the Device List, you can test only those

items. If you want to add a device later, return to the Operation

Menu and reselect System diagnostics.

Note

After you install MS-DOS or another operating system, you

should always boot the computer from your hard disk or

from the system diskette to use it. When you finish running

System diagnostics, remove the Reference diskette from

drive A. If you do not have a hard disk, insert the system

diskette. Then reset your computer to make sure it performs

all the commands in the CONFIG.SYS and AUTOEXEC.BAT

files.

Performing System Diagnostics

C-3