Enterasys Networks ANG-1000 - Manual (Page 38)

26
Aurorean Network Gateway-1000 User’s Guide
Chapter 3
Configuring the ANG-1000 with Aurorean Web Config
Figure 23 Firewall Setup Window
2 Enable the option of your choice and click Apply.
NOTE
Experienced administrators can fine tune firewall functionality by editing
the ipfwadm file in the Configuration Editor. For more detailed
information, check the following IPFWADM Web sites:
- www.xos.nl/linux/ipfwadm/paper/
- www.fwtk.org/ipfwadm/faq/ipfwadm-faq.html
NOTE
If you press the reset button after you have configured your ANG-1000,
you will lose your entire configuration. Any settings you have changed
from factory defaults, such as firewall rules, will be removed. We
recommend that you save these settings to a Notepad file which you then
can reference if you are compelled to use the reset button.
Aurorean Network Gateway 1000
Firewall Setup
Help
VPN Status
VPN Setup
VPN
Connectivity Setup
Internet Setup
LAN Setup
Firewall Setup
ANG-1000 System
Set Password
Device Status
Firmware Update
Advanced Utilities
Internet Connection:
LAN Connection:
VPN Gateway Connection:
Allow Web configuration access
Allow Telnet login access
Apply
Allow Web configuration access
Allow Telnet login access
Allow Web configuration access
Allow Telnet login access