Logging into web config – Enterasys Networks ANG-1000 User Manual
Page 25
Aurorean Network Gateway-1000 User’s Guide
13
Chapter 3
Configuring the ANG-1000 with Aurorean Web Config
Logging into Web Config
To log into Web Config, perform the steps below.
1
Point your Web browser at the default trusted IP address of the
ANG-1000. In the browser’s Location field at the top of the window,
type: http://192.168.1.1 or aurorean. (include the dot) and click OK.
The Login window appears as shown in Figure 14.
Figure 14 Login Window
2
Type netadmin in the User Name and Password fields as shown in
Figure 14.
3
Click the checkbox to save your password if you desire and click OK.
The VPN Status window appears as shown in Figure 15.