Enterasys Networks ANG-1000 - Manual (Page 33)

Aurorean Network Gateway-1000 User’s Guide
21
Chapter 3
Configuring the ANG-1000 with Aurorean Web Config
1 Click the Internet Setup menu option.
The Internet Setup window appears as shown in Figure 21.
Figure 21 Internet Setup Window
2 Do one of the following:
H Click the DHCP radio button and perform the following steps:
– Enter a Hostname for the system.
– Optionally, check the Use hostname with DHCP checkbox.
– Click Apply.
H Click the Manual assigned IP address radio button and perform
the following steps:
– Specify the ANG-1000’s IP address.
– Set the Subnet mask.
Aurorean Network Gateway 1000
Help
VPN Status
VPN Setup
VPN
Connectivity Setup
Internet Setup
LAN Setup
Firewall Setup
ANG-1000 System
Set Password
Device Status
Firmware Update
Advanced Utilities
Links
Config File Editor
Aurorean Products
Enterasys Home
Internet Setup
Internet Address Assignment:
DHCP assigned IP address
Hostname:
Use Hostname with DHCP
Manual assigned IP address
IP Address:
Subnet:
Gateway:
Primary DNS:
Secondary DNS:
PPPoE assigned address
Username:
Password:
Confirm:
Apply