Enterasys Networks ANG-1000 - Manual (Page 35)

Aurorean Network Gateway-1000 User’s Guide
23
Chapter 3
Configuring the ANG-1000 with Aurorean Web Config
Setting Up the LAN
LAN configuration of the Trusted side of the ANG-1000 involves choosing
either to manually set an IP address and subnet for the ANG-1000 or
dynamically assigning its IP address via your network’s DHCP server.
Begin LAN Setup by performing the following steps:
1 Click the LAN Setup menu option.
The LAN Setup window appears as shown in Figure 22.
Figure 22 LAN Setup Window
2 Do one of the following:
H Click the DHCP assigned IP address radio button and perform
the following steps:
– Click Apply.
Aurorean Network Gateway 1000
LAN Setup Help
VPN Status
VPN Setup
VPN
Connectivity Setup
Internet Setup
LAN Setup
Firewall Setup
ANG-1000 System
Set Password
Device Status
Firmware Update
Advanced Utilities
Links
Config File Editor
LAN Address Assignment:
DHCP assigned IP address
Manual assigned IP address
192 168 1
1
255 0
100
DHCP server enabled
Starting IP address:
Number of IP addresses:
Enable DNS proxy
Enable WINS proxy
192 168
1
255 255
100
Apply
IP address:
Subnet: