Emerson Process Management 3000 - Manual (Page 20)

Instruction Manual
IB-106-300NH Rev. 4.2
July 2002
P-6 Rosemount Analytical Inc. A Division of Emerson Process Management
World Class 3000
QUICK START GUIDE
Use this Quick Start Guide if ...
1. You are using a World Class 3000 probe.
2. You are NOT using any optional components. Optional components are shown in the
shaded area in Figure 1.
3. You are familiar with the installation requirements for the IFT 3000 Intelligent Field Trans-
mitter and World Class 3000 probe.
4. You are familiar with the procedures for changing the jumpers located in the IFT 3000, as
described in Section 2, Installation.
If you cannot use the Quick Start Guide, turn to Section 2, Installation, in this Instruction
Bulletin.