Magnum Energy Magnum Panel (MP Series) - Manual (Page 74)

© 2011 Magnum Energy, Inc. Page 67
3.0 Installation
Master/Slave
Identification
Label Set
DC BREAKERS
ADDED LABELS
ADDED LABELS
AC BREAKERS
MASTER
INVERTER
SLAVE 1
INVERTER
MASTER
INVERTER
MASTER
INVERTER
SLAVE 1
INVERTER
SLAVE 1
INVERTER
SLAVE 1
INVERTER
SLAVE 1
INVERTER
SLAVE 1
INVERTER
SLAVE 1
INVERTER
MASTER
INVERTER
MASTER
INVERTER
MASTER
INVERTER
MASTER
INVERTER
SLAVE 3
INVERTER
SLAVE 3
INVERTER
SLAVE 3
INVERTER
SLAVE 3
INVERTER
SLAVE 2
INVERTER
SLAVE 2
INVERTER
SLAVE 2
INVERTER
SLAVE 2
INVERTER
Figure 3-41, Applying Master/Slave Identifi cation Labels
3.15 Master/Slave Identifi cation Label Set
To help reduce operator and maintenance errors resulting from incorrect identifi cation of the inverters
and circuit breakers, a Master/Slave Identifi cation Label Set is provided. After the MP enclosure/
Inverter system is wired and tested for proper operation, refer to Figure 3-41 to apply the labels
to the front cover of each inverter and to each circuit breaker in the MP enclosure. These labels
allow the operator to clearly identify the AC and DC breakers wired to each inverter; and to know
the relationship of each inverter to one another when connected in a parallel-stacked confi guration.