Magnum Energy Magnum Panel (MP Series) - Manual (Page 115)

Page 108 © 2011 Magnum Energy, Inc.
Appendix A - Optional Equipment and Accessories
Front Breaker
Face Plate.
This plate can be
removed or
adjusted to help
align knockout
openings around
installed breakers.
Eight Truss
head, T15 Torx
drive screws.
A8 Aligning Front Breaker Face Plate
On versions of the Magnum Panel that have the eight middle Truss head screws, the front breaker
face plate can be adjusted. When additional circuit breakers are installed, the middle eight Truss
head, Torx drive (T15) screws can be loosen or removed as shown in Figure A8-1. This allows
the knockout openings in the front breaker plate to be aligned around the newly installed circuit
breakers. See Figure 3-7 for a front view of the middle eight Truss head screws.
Info: Truss head screws provide a lower-profi le dome designed to prevent tampering.
Figure A8-1, Removing the Front Breaker Face Plate