Yaskawa DSD 406 - Manual (Page 33)

3 Operation
29 3/21/96
Parameter Functions
❷
The SCDU display will increment from ‘10.6’ to ‘11.0’ if the
⇑
key is pressed 4 times:
❏ Press the ENTER key to transfer the value in the SCDU display to the actual
value used by the drive. Note that the data indicator will change back to
GREEN to indicate that this value is now the actual value for this parameter:
If the ENTER key is pressed while the display is indicating that the upper or
lower limit has been exceeded, the display will change to the appropriate
limit value and the LED will change to GREEN.
The DATA/FCTN key can be pressed any time before the ENTER key is
pressed, to cancel the changes and return to the initial value.
❏ Press the DATA/FCTN key to put the SCDU back into the "Function" level.
As with the example above, the SCDU display will be:
DATA
RED
- - - -
11.0
DATA
RED
GREEN
DATA
11.0
OFF
DATA
40
All changes made become active values upon pressing the ENTER key.
They remain active until the next reset, or until the drive is powered down.