SMA SI 3.0-11 Quick Reference Guide V.3.0 - Manual (Page 43)

SMA Solar Technology AG 7 Commissioning
Installation - Quick Reference Guide Ersatzstrom-IS-en-30 43
Set the number of Sunny Island inverters in the system:
1Phase: system with one Sunny Island inverter 3Phase: system with three
Sunny Island inverters
If the country data set of the Sunny Island inverter is
VDE-AR-4105 and the system increases self-consumption
(SelfConsBackup), set the type of feed-in of the PV system
(see Section 3.1, page 12).
If the system does not
increase self-consumption
(BackupOnly) or the
country data set of the
Sunny Island inverter is
AS4777, confirm the basic
configuration with Y.
Confirm the basic
configuration with Y.
Asymmetric: The
installation site is located in
Germany and at least one PV
inverter feeds in
asymmetrically on a single
line conductor.
Symmetric: The installation
site is either located outside
of Germany or all PV
inverters feed in
symmetrically on three line
conductors.
Wait until the upper LED
(inverter LED) on slave 1 is
flashing and the Sunny
Remote Control is displaying
To identify Slave1, press
Tss on the Slv.
Set the line conductor to
which the Sunny Island is
connected:
Confirm the basic
configuration with Y.
Press the start-stop button on
slave 1.
L1: connection to line
conductor L1
L2: connection to line
conductor L2
L3: connection to line
conductor L3
Confirm the basic
configuration with Y.
Wait until the upper LED
(inverter LED) on slave 2 is
flashing and the Sunny
Remote Control is displaying
To identify Slave2, press
Tss on the Slv.