SMA SC 500CP-10-JP Maintenance Manual - Manual (Page 12)

3 Product Description SMA Solar Technology AG
12 SCCP-JP-WA-A4-en-12 Maintenance Manual
3 Product Description
3.1 Design of the Inverter
Figure 1: Design of the inverter
3.2 Type Label
The type label clearly identifies the product. There is one type label present in the Sunny Central. The type label is located
in the right-hand top corner inside the interface cabinet.
You will require the information on the type label to use the product safely and when seeking customer support from the
SMA Service Line. The type labels must be permanently attached to the product.
Position Designation
A Inverter cabinet
B Interface cabinet
C Ventilation grid
Reading off the serial number
You can read off the serial number without opening the inverter. The serial number can be found on the roof of the
inverter at the top left. You can also read off the serial number from the touch display.
Reading off the firmware version
You can read the version number of the firmware from the inverter and the touch display via the user interface of the
inverter or on the touch display.