HEIDENHAIN TNC 620 (73498x-01) - Manual (Page 542)

542
Comparison: Differences in MDI operation
Comparison: Differences in programming
station
PLANE function:
„ TABLE ROT /COORD ROT not defined „ Configured setting is used „ COORD ROT is used
„ Machine is configured for axis angle „ All PLANE functions can be used „ Only PLANE AXIAL is executed
„ Programming an incremental spatial
angle according to PLANE AXIAL „ Error message is issued „ Incremental spatial angle is
interpreted as an absolute value
„ Programming an incremental axis
angle according to PLANE SPATIAL if
the machine is configured for spatial
angle „ Error message is issued „ Incremental axis angle is interpreted
as an absolute value
Special functions for cycle
programming:
„ FN17 „ Function available, details are different „ Function available, details are different
„ FN18 „ Function available, details are different „ Function available, details are different
Compensation of tool length in the
position display DL from the TOOL CALL, tool lengths L and
DL from the tool table are taken into
account in the position display.
Tool lengths L and DL from the tool table
are taken into account in the position
display.
Function TNC 620 iTNC 530
Function TNC 620 iTNC 530
Execution of connected sequences Function partially available Function available
Saving modally effective functions Function partially available Function available
Function TNC 620 iTNC 530
Demo version Programs with more than 100 NC
blocks cannot be selected, an error
message is issued Programs can be selected, max. 100
NC blocks are displayed, further blocks
are truncated in the display
Demo version If nesting with PGM CALL results in
more than 100 NC blocks, there is no
test graphic display; an error message
is not issued Nested programs can be simulated.
Copying NC programs Copying to and from the directory TNC:\
is possible with Windows Explorer TNCremo or file manager of
programming station must be used for
copying
Shifting the horizontal soft-key row Clicking the soft-key bar shifts the soft-
key row to the right, or to the left Clicking any soft-key bar activates the
respective soft-key row