HEIDENHAIN TNC 310 (286 140) Pilot - Manual (Page 48)

4 8
Point Patterns
LINEAR PATTERN (221)
CYCL DEF: Select Cycle 221 LINEAR PATTERN
Starting pnt 1st axis: Q225
Starting pnt 2nd axis: Q226
Spacing in 1st axis: Q237
Spacing in 2nd axis: Q238
Number of columns: Q242
Number of lines: Q243
Angle of rotation: Q224
Set-up clearance: Q200
Surface coordinate: Q203
2nd set-up clearance: Q204
• Cycle 221 LINEAR PATTERN is effective immediately upon
definition!
• Cycle 221 automatically calls the last defined fixed cycle!
• Cycle 221 can be combined with Cycles 1, 2, 3, 4, 5, 17,
200, 201, 202, 203, 204, 212, 213, 214, 215
• In combined cycles, the set-up clearance, surface coordinate
and 2nd set-up clearance are always taken from Cycle 221!
The TNC automatically pre-positions the tool in the tool axis and in the
working plane.