HEIDENHAIN TNC 310 (286 140) Pilot - Manual (Page 4)

4
Fundamentals
F u n d a m e n t a l s
P r o g r a m s / T a b l e s
Programs and tables are stored in the TNC as files. The file name is
composed of two parts:
3546351.H
File name File type
Maximum length: see table at right
8 characters
Creating a New Part Program
Enter a new file name
Initiate a conversational program.
Select unit of measure for dimensions (mm or inches)
Define the blank form (BLK) for graphics:
Enter the spindle axis
Enter coordinates of the MIN point:
the smallest X, Y and Z coordinates
Enter coordinates of the MAX point:
the greatest X, Y and Z coordinates
Files in the TNC File type
Programs in
• HEIDENHAIN format . H
Tables for
• Tools TOO L .T
1 BLK FORM 0.1 Z X+0 Y+0 Z-50
2 BLK FORM 0.2 X+100 Y+100 Z+0