HEIDENHAIN TNC 310 (286 140) Pilot - Manual (Page 30)

3 0
Drilling Cycles
Drilling Cycles
PECKING (1)
CYCL DEF: Select Cycle 1 PECKING
Setup clearance: A
Total hole depth (Distance from the workpiece surface to
the bottom of the hole):
B
Pecking depth: C
Dwell time in seconds
Feed rate F
If TOTAL HOLE DEPTH is greater than or equal to the PECKING
DEPTH, the tool drills the entire hole in one plunge.
6 CYCL DEF 1.0 PECKING
7 CYCL DEF 1.1 SET UP 2
8 CYCL DEF 1.2 DEPTH -15
9 CYCL DEF 1.3 PECKG 7.5
10 CYCL DEF 1.4 DWELL 1
11 CYCL DEF 1.5 F80
12 L Z+100 R0 FMAX M6
13 L X+30 Y+20 FMAX M3
14 L Z+2 FMAX M99
15 L X+80 Y+50 FMAX M99
16 L Z+100 FMAX M2