HEIDENHAIN TNC 310 (286 140) Pilot - Manual (Page 26)

2 6
Subprograms
S = Jump; R = Return jump
Subprogram Nesting:
A Subprogram within a Subprogram
1 The main program runs up to the first subprogram call CALL LBL1.
2 Subprogram 1 runs up to the second subprogram call CALL LBL2.
3 Subprogram 2 runs to its end.
4 Subprogram 1 resumes and runs to its end.
5 The main program resumes.
• A subprogram cannot call itself.
• Subprograms can be nested up to a maximum depth of
8 levels.