HEIDENHAIN ND 1300 CNC Setup - Manual (Page 49)

40
Software fence setup
The software fence screen provides fields for defining
and enabling a user-defined area or volume range of
CNC motion.
Defining a software fence
A software fence is defined using the Teach function.
NOTE
A repeatable machine zero must be established prior to defining a machine or user
software fence.
To define a software fence using the Teach function:
1 Click the Teach button and fol-
low the instructions displayed on the
screen. When the fence is defined,
Min and Max locations will be dis-
played for each axis.
Enabling or disabling the software fence
To enable or disable the software fence:
1 Check the enable boxes to enable, or clear the
enable boxes to disable the software fence.
Machine CNC range of motion
Software fence CNC range of motion
CNC Setup and PID Loop Tuning Guide