HEIDENHAIN ND 1200 - Manual (Page 44)

44 1 Operation
1
.4 Measur
ing P
a
rt
F
e
at
ur
es
Measuring circles
A minimum of 3 points are required to measure a circle. A maximum
of 100 points can be probed and will be processed by a fit algorithm to
define the circle.
U Press the CIRCLE MEASUREMENT key. The Probe
Circle screen will be displayed. Press the key twice to
measure a series of circles using auto repeat.
U Move the stage to position the crosshairs over a point
on the circumference of the circle and press the
ENTER key.
U Move the stage to position the crosshairs over two
other points evenly distributed around the
circumference, pressing the ENTER key to collect
each point.
U Press the FINISH key to complete the measurement.
The circle position and diameter will be shown and
the circle feature will be added to the feature list.
U Press the D/R AXIS soft key to toggle the display
between Diameter and Radius if desired.
U Press the CHANGE soft key to change the circle fit
algorithm if desired.
Circle fit algorithms include:
„ LSBF: Fit determined by minimizing the sum of the squared point
deviations from the form fit.
„ ISO: Fit determined by minimizing the form deviation.
„ Outer: Yields the biggest circle.
„ Inner: Yields the smallest circle.
A circle is probed on the part
The circle position and diameter are shown and the
circle feature is added to the feature list