HEIDENHAIN ND 1200 - Manual (Page 111)

ND 1200 QUADRA-CHEK 111
2.3 Sof
tw
a
re
set
u
p Measurement scaling for parts that expand or
shrink
Scale factors scale measurement results using a multiplier and are
useful when measuring parts that will expand or shrink after
inspections have been performed.
Scale Factor screen
The Scale Factor screen contains configuration fields for:
„ Enabling scale factor
„ Specifying a scale factor multiplier value
„ Providing the user access to scale factor editing
To configure scale factor settings:
U Press MENU/SETUP to display the setup menu and then highlight
the Scale Factor menu item.
U Highlight the Multiplier data field and enter the scale factor
multiplier.
U Highlight the User Settable choice field and press the NO soft key
to restrict access to those who can provide the supervisor
password, or the YES soft key to provide unrestricted access.
U Highlight the Active choice field and press the NO soft key to disable
the scale factor or the YES soft key to enable it.
U Press the FINISH key to return to the setup menu.
The setup process for all axes is identical and uses the
Encoders and Misc setup screens.
Password restricted access to setup parameters is
explained earlier on page 87.
Enter the scale factor multiplier Select NO to restrict access or YES to
allow user access to scale factor editing Select NO to disable or YES to enable
scale factor