HEIDENHAIN ND 760 E - Manual (Page 6)

6
Fundamentals
The ND 760 E position display unit was conceived for use on
electrical discharge machines (EDM).
The following functions support operation with EDMs:
• 7 switching outputs for the EDM axis
• Display of the MIN position, the distance-to-go, and the
total depth in the EDM axis. Because of the quick up-and-
down motion of the EDM axis, HEIDENHAIN
recommends displaying only the last minimum position
value.
• Simple compensation of the erosion depth with the aid of an
add key.
• Simple setup function for finding the center line between
two edges.
Fundamentals
Bateil1.pm6 21.01.2002, 09:39 6