HEIDENHAIN ND 760 E - Manual (Page 3)

3
Keys
• Select coordinate axis
• Select axis-specific operating
parameters
Numerical input
• Select datum 1 or 2
• Page backward in the list of special functions
• Page backward in the parameter list
• Cancel entry
• Reset the operating mode
• Zero the selected axis (if activated with P80)
• Select parameter: CL plus two-digit number
• Select the special functions
- Probe for center line
- mm/inch switchover
- Parameter entry
• Page forward in the list of special functions
Keys
Trigger points 1 and 2 before reaching the erosion
depth
Trigger point with respect to MIN position
Add key for the erosion depth
TP3, TP4
Additional switching points, defined with
respect to the top of the workpiece = 0
Trigger point for start position (HOME)
Trigger point for the erosion depth
Switchover from actual position display to MIN
position display
• Change algebraic sign
• Call the most recent dialog
• In the parameter list: change the parameters
SHIFT key
Use of double-function keys
• Confirm entry
• Page forward in the parameter list
Bateil1.pm6 21.01.2002, 09:39 3