HEIDENHAIN ND 760 E - Manual (Page 19)

19
Add key
COMP. DEPTH
After the compensation value has been called, the currently
valid value is displayed in the Y axis. You can enter a new
value with the numerical keys and transfer it with the ENT
key.
The compensation value is used to calculate a new erosion
depth. If no value is entered, the displayed value is used for
the calculation.
To cancel this operating mode, press the SHIFT or the CL key
(the displayed value is then not used for the calculation).
Add
Key
Input range: -99 999.9999 to
99 999.9999 mm
Bateil1.pm6 21.01.2002, 09:39 19