Grass Valley T2 Classic iDDR Workstation Mode SP2 - Manual (Page 94)

T2 ― UserManual(SP2) ― Workstationmode ― 94
Section3― Workstationmode
Audio Level
Clicking on the audio level area (arrow symbol) opens the Audio Level
meter.
LED level Audio Level/VAR Control button
Scale Monitor Channel
Gain slider
Audio Level/VAR Control button Opens the VAR Control screen
Scale
Switches the display scale.
PEAK0 : -60dB to 0dB (Displays so that the maximum volume as 0dB: dBFS)
REF0 : -40dB to +20dB (Displays the standard level (Headroom) as 0dB)
LED level Displays the audio level (peak meter).
Gain slider
Adjust the gain for each channel. (Only ANA is available on the R1 channel)
Range : – ∞ to + 10dB
Monitor Channel
Choose a monitor channel for headphone jack.
1+2 / 3+4 / 5+6 / 7+8 are available for each R1/P1/P2 channel.