Grass Valley T2 Classic iDDR Workstation Mode SP2 - Manual (Page 19)

T2 ― User Manual(SP2) ― Workstation mode ― 19
Part names and functions
P1/P2 output section
LTC Used for LTC (timecode) output.
AES/EBU Used for digital audio (AES/EBU) output.
CMPST Used for Composite output.
DVI-I Used for DVI-I output (for DVI, RGB, YPbPr).
SDI Used for SDI output.
MONITOR Used for monitor output (Composite).
Note The YPbPr signal is input/output via analog RGB pins on the DVI-I port. To
output YPbPr, use a RGB conversion connector cable.