Grass Valley T2 Classic iDDR Workstation Mode SP2 - Manual (Page 21)

T2 ― UserManual(SP2) ― Workstationmode ― 21
Start-upandshutdown
Switching to the Workstation mode
When the T2 starts up, it is running in the Front Panel mode by default.
To switch it to the Workstation mode, perform the following procedure.
1. On the PC monitor connected to the T2, choose Switch to Workstation
mode from the System menu.
* To switch back to the Front Panel mode, touch the touch screen LCD
screen, or choose Switch to Front Panel mode from the System menu on
the PC monitor.
Shutdown
The following procedure is to shutdown the T2.
1. Choose System - Exit.
System menu

2. On the dialog displayed, choose Shut Down and click the OK button.
To turn the T2’s main power off, wait until the screen goes blank,
confirm that the shutdown is complete, and then turn off the main
power switch on the rear panel.
Note Never shutdown your T2 by pressing and holding the Power switch, or by
turning off the Main power switch. Doing so may cause serious malfunctions.