Grass Valley T2 Classic iDDR Workstation Mode SP2 - Manual (Page 74)

T2 ― UserManual(SP2) ― Workstationmode ― 74
Section3― Workstationmode
Control buttons
Cue (IN) Cues the VTR to the existing IN point. (Available only in VTR mode)
Cue (OUT) Cues the VTR to the existing OUT point. (Available only in VTR mode)
Rew button Rewinds the VTR. (Available only in VTR mode)
Previous Frame button Moves back frame by frame. (Available only in VTR mode)
Stop button Stops playback/recording.
Rec button Starts recording.
Play button Starts playback. (Available only in VTR mode)
Next Frame button Moves forward frame by frame. (Available only in VTR mode)
FF button Fast-forward the VTR. (Available only in VTR mode)
Mark (IN)
Marks the current position as the IN point of the content. Marking an IN point
will set the timecode of the IN point in the timecode box.
Mark (OUT)
Marks the current position as the OUT point of the content. Marking an OUT
point will set the timecode of the OUT point in the timecode box, as well as
the duration of the clip in the Length box.
Clear button Clears the existing IN/OUT points.