Grass Valley T2 Classic iDDR Workstation Mode SP2 - Manual (Page 76)

T2 ― UserManual(SP2) ― Workstationmode ― 76
Section3― Workstationmode
Modes and functions of recording
See the following table for the recording modes and their functions.
Crash Rec Fixed Length Rec
VTR  *1  *1
Live  
*1 Available only when IN/OUT points are not set.
• In VTR mode, when both IN and OUT points are set, the range
between the IN and OUT points will be recorded, controlling the VTR.
• In VTR mode, when only IN point is set, the recording starts from the
specified IN point, controlling the VTR. (Recording must be stopped
manually.)
• According to the type of the recording, the icon of the Rec button
differs.
Crash Rec
This icon indicates that recording must be stopped
manually.
Fixed Length Rec
This icon indicates that the Fixed Length mode is
enabled.
In-Out Rec This icon indicates that the IN/OUT points are set.