Grass Valley T2 Classic iDDR - Manual (Page 98)

98 T2 Users Manual –SP3/SP4– October 17, 2011
Chapter 6 Additional/Updated Functions for SP3 and SP4
Backing up all data to other T2 (Sync backup)
T2 data (media files and database) can be synchronized to other multiple T2 on the
network. T2 (slave) data on the sync destination is initialized and they are completely
synchronized to T2 (master) data.
The following is the procedure for synchronizing T2 (master) data to T2 (slave).
CAUTION: Set the remote mode (R1-Remote mode/P1-Remote mode/P2-Remote
mode) to off on both T2 (master and slave) beforehand. (You cannot switch between
on and off while transferring files.)
Setting T2 on the sync destination (slave) to the slave mode
1. From the menu bar, click System T2 to T2 Sync backup...
• If you capturing or loading clips in the R1/P1/P2 channel, a message appears
asking whether to unload clips. Click OK to unload clips.
• The "T2 to T2 Sync backup" dialog box appears.
2. Select Slave mode , and then click Close .
• T2 on the sync destination (slave) is set to the slave mode.
• To synchronize data to multiple T2 (slave), perform steps 1 and 2 on all T2
(slave).