beautypg.com

Grass Valley T2 Classic iDDR User Manual

Page 79

background image

October 17, 2011

T2 Users Manual –SP3/SP4–

79

Batch capture

3. Configure the batch capture action in "VTR Batch Capture".

• In "Clip name", enter a prefix of the clip name generated at the batch capture.

The generated clip name is the "prefix of the clip name_Serial number". By

default, the clip name is "Clip_Serial Number".

• Unchecking

When an error occurs, continue to capture the following items.

stops recording if an error occurs.

• Unchecking

Completed items are not captured.

performs the completed batch

capture items again at the next batch capturing.

4. Click

OK

.

Importing the batch capture list and executing the batch capture

NOTE: Before executing the batch capture, make the input settings of the VTR you

use. Click

Config.

, and then click

Input Settings

in the "R1" tree to configure the

settings.

1. Switch to the R1-VTR mode.