Grass Valley T2 Classic iDDR - Manual (Page 102)

102 T2 Users Manual –SP3/SP4– October 17, 2011
Chapter 6 Additional/Updated Functions for SP3 and SP4
Local operations in the P1-Remote mode/P2-Remote mode
If the local operations of T2 are allowed, the following operations are available in the
P1-Remote mode/P2-Remote mode:
• Scrubbing bar operations
• Playback control operations (move to the first frame, reverse, frame reverse,
stop, playback, frame forward, fast-forward and move to the last frame)
• Move to an In/Out point, set an In/Out point, delete an In/Out point, create a sub
clip
• Switch display scale of the scrubbing bar
• Switch audio level display
• Create a thumbnail (right-click operation in the preview screen)
• Enter a clip/playlist name and tag
• Enter a value for the In point/Out point/duration, set the In point/Out point/
duration
• Edit playlist events (add, delete, sort, copy, paste, and change names)
• Display properties
• Load, unload clips/playlists
• Switch to on/off for the 3D sync mode, E to E mode, Loop mode
• Button operations of the lower part of the front panel
The following is the procedure for setting whether to allow local operations in the
P1-Remote mode/P2-Remote mode.
1. Click Config. , and then click Monitor & Remote in the "P1" tree or the "P2" tree.
2. Check Enable local operations while being remote controlled. , and then click
OK .