Grass Valley T2 Classic iDDR - Manual (Page 38)

38 T2 Users Manual –SP3/SP4– October 17, 2011
Chapter 3 T2 P2 Option
Workflow using P2
Playing sources in a P2 drive
You can load a file that is saved in a P2 card to your T2 for playback.
CAUTION: P2 clips in AVCIntra 100 or AVCIntra 50 are available only for 1Out.
If you want to play a P2 clip in AVCIntra 100 or AVCIntra 50 while recording in the
R1 channel, playing a clip in the P1/P2 channel, or loading a different clip in P1/P2
channel, you must stop the recording/playback operation or unload the clip.
1. Insert a P2 card into your AJ-PCD20.
2. In the Browse tab, click ... for P2.
3. Select the P2 drive on the "Browse for Folder" dialog box, and then click OK .
• The drive name is added to the P2 node in the Browse tab, and the clip list is
displayed.
4. Right-click a clip, and then click Load to P1 or Load to P2 .
• You can also load a clip by dragging and dropping it onto the P1/P2 channel or
double-clicking it after selecting a channel.
5. Click Play for the channel to which you loaded the clip.
CAUTION: Although In and Out points can be configured, importing only the part
between In and Out points is not available.