Grass Valley T2 Classic iDDR - Manual (Page 109)

October 17, 2011 T2 Users Manual –SP3/SP4– 109
Other additional/updated functions
Tally signal output from GPI
You can configure your T2 to output tally signal from GPI and turn on the tally lamp
of an external monitor while playing back or recording video.
The following procedure describes how to set the tally signal output to each GPI
Output pin (1 to 6).
1. Click Config.
2. Click Output in the "GPI" tree.
3. Click Previous or Next , and then select a pin (1 to 6).
• For the pin assignment of GPI Output, see "GPI input/output pin" on page 110 .