Exporting a grass valley hq mxf file from edius 6 – Grass Valley T2 Classic iDDR User Manual
Page 64
64
T2 Users Manual –SP3/SP4–
October 17, 2011
Chapter 6 Additional/Updated Functions for SP3 and SP4
3. Click
Browse...
to configure the export destination.
• You can select a clip in the clip list on the "Export" dialog box and click
Up
or
Down
to change the export order.
• You can select a clip in the clip list on the "Export" dialog box and click
Delete
to delete it from the export list.
4. Click
Start
.
• The export begins. You can check the progress in the transfer screen.
CAUTION: By default, the system will pause any transfer and conversion during a
recording or playback. If you want to change the setting to allow transfer and
conversion to be performed even during a recording or playback, click
Config.
and
then click
Common
in the "Transfer" tree. Unchecking
Pause file transfers while
recording or playing out.
enables transfer and conversion even during a recording
or playback. However, if this option is unchecked, the recording/playback
operations may not be performed normally, therefore, we recommend that you use
the system with this option checked.
Exporting a Grass Valley HQ MXF file from EDIUS 6
A project created on the EDIUS 6 Turnkey system can be exported to your T2 via
FTP.
You need to configure the FTP server settings in both EDIUS 6 and T2 beforehand.
For more information on how to configure the FTP settings, see