Grass Valley T2 Classic iDDR - Manual (Page 110)

110 T2 Users Manual –SP3/SP4– October 17, 2011
Chapter 6 Additional/Updated Functions for SP3 and SP4
4. Configure the tally signal output details in "Settings:".
• The name of the GPI Output pin is shown in "Name:".
• Select the GPI signal to be activated ( High or Low ) in "Active:".
• Select Tally - R1 in "Mode:", to output tally signal while recording in the R1
channel. Select Tally - P1 or Tally - P2 , to output tally signal while playing back
video in the P1 or P2 channel.
GPI input/output pin
CAUTION: GPI Output 1 to 6 and Input 1 to 6 are available on your T2. You
cannot use pin 7 and pin 15.
Pin Signal Pin Signal
1 Output 1 9 Input 1
2 Output 2 10 Input 2
3 Output 3 11 Input 3
4 Output 4 12 Input 4
5 Output 5 13 Input 5
6 Output 6 14 Input 6
7 NC 15 NC
8 Ground SHELL Ground
9 15
1 8