Exporting a file in the avchd format – Grass Valley T2 Classic iDDR User Manual

Page 74

T2 Users Manual –SP3/SP4–

October 17, 2011

Chapter 6 Additional/Updated Functions for SP3 and SP4

CAUTION: By default, the system will pause any transfer and conversion during a

recording or playback. If you want to change the setting to allow transfer and

conversion to be performed even during a recording or playback, click

Config.

and

then click

Common

in the "Transfer" tree. Unchecking

Pause file transfers while

recording or playing out.

enables transfer and conversion even during a recording

or playback. However, if this option is unchecked, the recording/playback

operations may not be performed normally, therefore, we recommend that you use

the system with this option checked.

Converting AVCHD sources stored in a bin to Grass Valley HQ AVI

You can convert an AVCHD format clip that is stored in a bin to a Grass Valley HQ

AVI clip. The procedure is the same as for converting a Grass Valley HQ MXF format

clip to a Grass Valley HQ AVI clip. For more information, see

NOTE: Your T2 can play a playlist in which AVCHD format sources and

non-AVCHD format ones are mixed.

Sending/receiving AVCHD sources to/from your T2 via FTP

FTP can be used to connect to your T2 from other devices or edit terminals etc. to

upload and download sources. Procedure for sending/receiving AVCHD sources to/

from your T2 via FTP is the same as for sending/receiving XDCAM sources to/from

CAUTION: If the post-import file type is set to "HQ" in the AVCHD import

settings, an AVCHD format source is converted to Grass Valley HQ AVI after the

upload when being uploaded to your T2 via FTP.

CAUTION: If you want to use Chinese for file names, you must set the character set

of file names to UTF-8 on the FTP client side beforehand. Correct file names cannot

be displayed if the character sets do not match. The configuration method depends

on your software. Refer to the help etc. of your software.

Exporting a file in the AVCHD format

Clips imported as the original AVCHD format can be exported as the AVCHD

format.

For important notes on exporting, see

1. Display the clips in the Bin tab.

2. Select the AVCHD format clip(s) you want to export, right-click on it, and then