Grass Valley T2 Classic iDDR User Manual

Page 91

October 17, 2011

T2 Users Manual –SP3/SP4–

Converting a playlist to a single clip

NOTE: A timecode set in a playlist or event properties can be retained in each

frame of the converted media file.

NOTE: The profile (size and frame rate) of the converted clip is the same as the

profile of the playlist.

NOTE: The audio gain set for the event in the playlist is maintained in the

converted clip. Audio is converted into PCM 48kHz 24bit 8ch.

Converting a playlist stored in a bin to a single clip

1. In the Bin tab, select the playlist(s) you want to convert, right-click on it, and then

click

Convert

Convert to AVI(Grass Valley HQ)

Convert to MXF(XDCAM)

• Multiple playlists can be selected.

2. Click

Yes

• The conversion begins. You can check the progress in the transfer screen.

• The new converted clips will be saved in the same bin as their original playlists.

CAUTION: By default, the system will pause any transfer and conversion during a

recording or playback. If you want to change the setting to allow transfer and

conversion to be performed even during a recording or playback, click

Config.

and

then click

Common

in the "Transfer" tree. Unchecking

Pause file transfers while

recording or playing out.

enables transfer and conversion even during a recording

or playback. However, if this option is unchecked, the recording/playback

operations may not be performed normally, therefore, we recommend that you use

the system with this option checked.

Converting a playlist to a single media file for export

1. In the Bin tab, select the playlist(s) you want to export, right-click on it, and then