Grass Valley T2 Classic iDDR - Manual (Page 40)

40 T2 Users Manual –SP3/SP4– October 17, 2011
Chapter 3 T2 P2 Option
NOTE: If you import an MXF single file, click MXF in the "Transfer" tree, and
then select a format from the "File format after import:" list.
5. Select the import destination bin.
• You can click New Bin... to create a new bin and specify it as the import
destination.
• You can select a clip in the clip list on the "Import" dialog box and click Up or
Down to change the import order.
• You can select a clip in the clip list on the "Import" dialog box and click Delete
to delete it from the import list.
6. Click Start .
• The import begins. You can check the progress in the transfer screen.
CAUTION: By default, the system will pause any transfer and conversion during a
recording or playback. If you want to change the setting to allow transfer and
conversion to be performed even during a recording or playback, click Config. and
then click Common in the "Transfer" tree. Unchecking Pause file transfers while
recording or playing out. enables transfer and conversion even during a recording
or playback. However, if this option is unchecked, the recording/playback
operations may not be performed normally, therefore, we recommend that you use
the system with this option checked.