Grass Valley T2 Classic iDDR - Manual (Page 19)

October 17, 2011 T2 Users Manual –SP3/SP4– 19
Workflow using XDCAM
1. Display the XDCAM clips in the Browse tab.
2. Select the clip(s) you want to import, right-click on it, and then click Import...
• Multiple clips can be selected.
• The "Import" dialog box appears.
3. Click Config...
• The "Format" column in the list shows the file format to be imported. If no
change is necessary, you do not need to click Config... to change the setting.
Proceed to step 5.
4. From the "File format after import:" list in the XDCAM Import Settings, select a
format, and then click OK .
• If you import a clip as the XDCAM format, select XDCAM . If you import a clip
after converting it to Grass Valley HQ AVI, select HQ .
NOTE: If you import an MXF single file, click MXF in the "Transfer" tree, and
then select a format from the "File format after import:" list.
5. Select the import destination bin.
• You can click New Bin... to create a new bin and specify it as the import destination.
• You can select a clip in the clip list on the "Import" dialog box and click Up or
Down to change the import order.
• You can select a clip in the clip list on the "Import" dialog box and click Delete
to delete it from the import list.